Layer1Labs is raising seed funding — $1–1.5M on a SAFE, seeking a lead investor. Talk to us →
Document · ChronoFabric

ChronoFabric Technical Brief

ChronoFabric in brief: what the deterministic soft IP is, the Kria platforms it targets, how it is delivered, and what it has measured on hardware.

Version 1.0 · October 26, 2026 · PDF · 8 pages · Layer1Labs Silicon Inc.

Key figures

21,000+

scheduled packets delivered with zero missed departures and zero dropped — a 100% delivery rate, including a continuous 10,000-packet endurance run

Measured on hardware — two Kria boards, 10-gigabit link

61.1 ns

departure jitter (standard deviation) at its lowest — roughly 160× tighter than the same boards scheduling from the CPU

Measured on hardware

620 ns

the tightest timing budget in the equivalence runs — the cadence a 1.6-terabit link would impose; the schedule held exactly at every level tested

Equivalence-validated — not a transport measurement at that rate

22 µs

worst-case scheduling latency over a full 24-hour run in the full hardware profile, with 99.99% of cycles at or under 12 µs

Measured on hardware — Kria KV260, 864 million cycles

What it covers

  1. The problem: timing that software cannot hold
  2. What ChronoFabric is
  3. Measured on hardware
  4. The beta platform and delivery
  5. The staged roadmap
  6. Evaluating ChronoFabric
  7. Limits, stated plainly

Basis

This brief assembles ChronoFabric’s published status and measurements from the ChronoFabric page and the FAQ. The measurements were made on the beta platform — Kria FPGA evaluation boards (KR260/KV260) over 10-gigabit links.

Production-scale fabrics (100G/400G, ASIC) remain the roadmap, not a measurement. The brief’s limits section states what has not been established, in the same terms as the site.